# Commercial Fence Installation in Hammond, LA

> Commercial fence installation in Hammond, LA: security chain link, ornamental steel and solid buffer fences, built to Hammond's commercial fence rules and permit.

URL: https://palisadeshammondfence.com/commercial-fence-installation/

Service

Security chain link, ornamental steel and aluminum, and solid buffer screens for businesses and institutions, with vehicle gates and Hammond's commercial fence rules built in.

Get an Estimate

[(985) 866-3827](tel:+19858663827)

Last Updated: November 1, 2026

On a commercial yard, the gate is the busiest and most stressed part of the fence. It is planned first, and the run is laid out from it.

In Hammond, open wire fences can reach 10 ft in commercial and industrial districts.

Mon to Fri 8 to 6 · Sat and Sun 9 to 2

Commercial fence installation is planned around how a property is used: who comes in, who stays out, where vehicles turn, and which neighbors the code protects. [Palisades Hammond Fence](https://palisadeshammondfence.com/) installs commercial fences across Hammond and the surrounding parishes, including security chain link around yards and equipment, ornamental steel and aluminum for storefronts and multifamily sites, and solid buffer screens beside homes. Installation is carried out by licensed and insured fence contractors.

Commercial work runs under different rules from a back-yard fence. Hammond’s code allows taller wire fences in commercial districts, can require a buffer fence between uses, restricts barbed wire and sets a separate permit fee, and state licensing changes with project value. This page explains those rules, how security fencing is built, and how gates and phasing shape the job.

## What happens on the first visit

The site walk is with the owner or manager, and it starts at the gates. Vehicle entrances, delivery routes, turning space, emergency access and pedestrian paths decide where gates go, how wide they are, whether they swing or roll, and whether they need an opener. The fence line is then laid out from those openings, with corners, grade changes and drainage swales marked.

Commercial sites hide more underground. Louisiana 811 marks public utilities after a request made at least 48 and no more than 120 hours before digging, but private lines such as parking lot lighting, irrigation, private water and sewer and site security cabling are the owner’s to locate. The walk asks for site plans or a private locate before any post hole is drilled. Neighboring homes, parking that abuts the line and any servitude on the plat are noted too.

## Hammond’s commercial fence rules

Hammond’s development code has several provisions that apply mainly to commercial and industrial property. They set the shape of the job before materials are chosen.

- **Buffer fences.** The Building Official may require a solid fence 6 to 8 ft high between residential and commercial or industrial uses, paid for by the use causing the nuisance.
- **Parking.** Where parking abuts a buffer, the code calls for curb or wheel stops and a 2 ft green strip, and fences next to parking lots are protected by wheel stops.
- **Height.** Open wire fences can reach 10 ft in commercial and industrial districts.
- **Barbed wire.** Not allowed in residential districts.
- **Posts and wood.** Wire fences stand on galvanized pipe supports at least 1.5 in in diameter, no more than 7 ft apart, and wood must be weatherproofed.

The commercial fence permit is $50, doubled if work starts before it is issued, and the city may halt work or require removal. Corner sight rules still limit anything within 30 ft of an intersection to 3 ft. The [fence permit guide](https://palisadeshammondfence.com/guide/fence-permits/) walks through the application.

### Beyond Hammond

Each town sets its own commercial rules. Ponchatoula’s permit checklist asks for the location and size of fencing or buffer zones on commercial site plans. Covington’s fence permit asks non-residential applicants for the owner’s authorization and the gate locations, as the [Covington page](https://palisadeshammondfence.com/service-areas/covington/) explains. Mandeville limits barbed wire to its B-2, B-4, M-1 and M-2 districts, above 6 ft; the [Mandeville page](https://palisadeshammondfence.com/service-areas/mandeville/) covers its other limits, and current details are confirmed per address.

## Security fencing: what makes a fence hard to beat

A fence delays and deters. It does not make a site secure on its own, and how much it delays depends on details that are easy to cut from a bid.

### Height, mesh and framework

Taller fabric is harder to climb, which is why Hammond’s 10 ft allowance matters on yards. Heavier-gauge fabric resists cutting and bending, and a smaller mesh leaves fewer toeholds. The framework carries all of it: heavier line and terminal posts, a top rail, and a bottom tension wire or fabric set close to grade so it can’t be lifted. The installation practice for chain link is set out in ASTM F567, and the [chain link fence page](https://palisadeshammondfence.com/chain-link-fence-installation/) explains terminal posts and bracing.

### Tops and gates

Barbed wire on angled arms adds height and deterrence where zoning allows it. Gates are the weak point of every perimeter: hinge posts, latches, drop rods and the gap under the leaf all get the same attention as the fabric. Keeping a clear strip along the inside and outside of the line, without stacked materials or trees, removes the easiest ways over.

## Gates, access and wind

Vehicle gates on commercial sites are often wide, so the choice between swing and rolling gates comes down to space and traffic. A swing gate needs a clear arc; a rolling or cantilever gate needs room beside the opening. The [swing vs sliding gate guide](https://palisadeshammondfence.com/guide/swing-vs-sliding-gates/) compares them, and openers, keypads and safety devices are covered under [automatic gate installation](https://palisadeshammondfence.com/automatic-gate-installation/).

Wind changes the post plan on tall fences. An open 10 ft chain link fence passes most wind, but privacy slats, windscreen fabric or banners turn it into a sail, and a solid 8 ft buffer takes the full load. FEMA has declared major disasters covering Tangipahoa Parish for storms from Katrina to Francine in 2024, so tall screened fences get heavier posts, closer spacing and deeper footings in the area’s poorly drained soils. The [wind-resistant fence page](https://palisadeshammondfence.com/wind-resistant-fence/) explains the loads.

## Licensing and phasing

The Louisiana State Licensing Board for Contractors requires a commercial license for commercial projects of $50,000 or more in labor and materials, including subcontractors and specialty trades. Hammond also registers contractors not licensed by the state. Ask which credential covers your project.

Most commercial sites have to stay open while the fence goes in. Work is sequenced so an entrance is never left unsecured overnight, old fence comes out in sections as new posts go in, and posts cure before gates are hung and loaded. Hours, deliveries and closures are agreed before the first post.

## What a commercial fence costs

No regional published range exists for commercial chain link, so prices come from the site itself. Height, fabric gauge and coating, post diameter and wall, barbed or razor tops, the number and width of gates, openers and access control, phasing and after-hours work, and tear-out all move the price. Ornamental and buffer fences start from the material ranges on the [fence installation cost guide](https://palisadeshammondfence.com/guide/fence-installation-cost/), at commercial grades.

Labor runs below national levels: construction laborers in the Hammond metro earn a mean $19.63 an hour against $25.02 nationally ([BLS OEWS](https://www.bls.gov/oes/current/oes472061.htm)). A wage is not a billing rate, because an installed price also covers materials, insurance, licensing, equipment and overhead. The [fence cost estimator](https://palisadeshammondfence.com/tools/fence-cost-estimator/) gives residential ranges as a starting point.

## What's included

- A site walk with the owner or manager, marking the line, gates, traffic, drainage and any neighboring homes
- A check of zoning, buffer, barbed-wire and sight rules for the site, and the commercial fence permit
- The Louisiana 811 locate request, plus a check for private site lines 811 does not mark
- Galvanized steel framework sized for the fence height and fabric, with posts set in concrete
- Fabric, ornamental panels or solid screen boards in the grade and height quoted
- Barbed wire arms where the zoning allows them
- Walk and vehicle gates, swing or rolling, with frames and hardware for the traffic they carry
- Work phased so the property can keep operating, with posts cured before gates are hung
- Tear-out and haul-away of old fencing when quoted
- Gate adjustment, cleanup and a final walk of the line

## Common commercial fence types

|  | Commercial chain link | Ornamental steel or aluminum | Solid buffer screen |
| --- | --- | --- | --- |
| Best for | Yards, storage, equipment and utility sites | Storefronts, offices, apartments, churches | Separating a business from neighboring homes |
| Security | Tall, climb-resistant mesh; barbed arms where allowed | Hard to climb; looks finished | Blocks views; moderate deterrence |
| Hammond height | Open wire to 10 ft in commercial districts | Confirmed for the site | 6 to 8 ft when the city requires a buffer |
| Wind load | Low unless slatted or screened | Low | High; heavier posts and closer spacing |
| Price | No regional published range; height, gauge and gates set it | Priced from the ornamental ranges and grade | Priced from material and height |

## Related resources

Cost Guide

How Much Does a Chain Link Fence Cost in Hammond, LA?

The installed range for residential chain link, why short runs and coated fabric cost more per foot, and how Hammond's front-yard rule shapes a chain link job.

Learn

Do You Need a Permit to Build a Fence in Louisiana?

Louisiana leaves fence permits to each city and parish. Here is what Hammond and Covington require, what is known about Mandeville, and how heights, setbacks and corner lots shape the application.

Decision Guide

Swing Gate or Sliding Gate: Which Fits Your Driveway?

How much room each gate needs to open, what a sloped or ditched driveway does to a swing gate, when a cantilever slide beats a track, and how wet ground and wind change the choice.

Learn

Can You Put a Fence in a Drainage Easement?

What a drainage or utility servitude on your plat means for a fence, who answers for a ditch between two lots, why a solid fence can't dam natural runoff, and how fences are planned on flood-prone ground.

Learn

What Are Louisiana's Fence Laws for Property Lines and Neighbors?

What the Louisiana Civil Code says about enclosing land, fences on a shared line, boundary markers and long possession, and where city codes take over for height and front yards.

## From the first call to the last gate

1. First call You describe the fence, the yard and the timing, and set a visit.
2. Site visit The line is walked and measured, gates and slopes noted, and the soil and drainage checked.
3. Permit and 811 The permit drawing goes to the city or parish, and utilities are located before any digging.
4. Build Posts are set and allowed to cure, then rails, panels or fabric and gates go up.
5. Walkthrough Gates are adjusted, the site is cleaned, and you check the finished line.

## What this work looks like

A six-foot galvanized chain link fence with a top rail around a church parking lot, a single-story brick church building behind

A black ornamental steel fence along the frontage of a small single-story office building with a lawn strip and a parking lot

A wooden board privacy enclosure around a dumpster pad behind a small commercial building, with a pair of wooden gates closed across its front

A galvanized chain link cantilever sliding gate closed across the gravel entrance to an equipment yard, chain link fence continuing out of the frame

## Questions about commercial fences

### Does Hammond require a fence between a business and neighboring homes?

It can. Hammond's development code lets the Building Official require a solid buffer fence 6 to 8 ft high between a residential use and a commercial or industrial use, at the expense of the use causing the nuisance. Where parking abuts the fence, the code adds curb or wheel stops and a 2 ft green strip. Whether a buffer is required on a given site is the city's call.

### Is barbed wire allowed on a commercial fence around Hammond?

In Hammond, barbed wire is not allowed in residential districts, so it is limited to non-residential zoning. Mandeville's code allows barbed wire only in its B-2, B-4, M-1 and M-2 districts and only above 6 ft. Other towns and the parishes set their own rules, so barbed or razor tops are confirmed for the site before they go on the permit drawing.

### How tall can a commercial chain link fence be in Hammond?

Up to 10 ft for an open wire fence in Hammond's commercial and industrial districts, according to the development code. Solid fences of wood, vinyl, masonry and similar materials top out at 8 ft behind the front building line. Corner sight rules still cap anything within 30 ft of an intersection at 3 ft, and the permit confirms the height for the site.

### What license does a contractor need for a commercial fence project in Louisiana?

The Louisiana State Licensing Board for Contractors requires a commercial license for commercial projects of $50,000 or more in labor and materials, and that applies to subcontractors and specialty trades too. Hammond also has its own contractor registration for contractors not licensed by the state. Ask which credential covers your project before signing.

### What should a property manager send to start a commercial fence estimate?

The site address, a site plan, survey or aerial with the fence line drawn, the fence type and height, the number and width of gates with how they will be used, any access control wanted, and the hours the site must stay open. Photos of the existing fence and any neighboring homes help, as does the owner's authorization if you manage the property.

## Related services

### Chain link fences →

Galvanized and vinyl-coated chain link for back yards, dogs and property lines, with braced terminal posts, a bottom tension wire and posts spaced to Hammond's code.

### Automatic gates →

Swing and slide gate operators with the power, access controls and entrapment protection a powered gate needs, on a gate built to be automated.

### Wrought iron fences →

Ornamental steel fences and gates in the wrought iron style, from galvanized prefab panels to custom fabricated work, finished and detailed to keep rust off in a wet climate.