# How Much Does an Aluminum Fence Cost in Hammond, LA?

> Aluminum fence cost around Hammond, LA: per-foot ranges for ornamental aluminum, pool barriers and steel or iron, plus slope, gates and front-yard rules.

URL: https://palisadeshammondfence.com/guide/aluminum-fence-cost/

Cost Guide

The installed range for ornamental aluminum, how it compares with steel and wrought iron, and what slope, picket spacing, pool rules and gates add.

Last Updated: November 1, 2026

Aluminum is the usual answer when a Hammond front yard needs a fence: it is metal, it is open, and it fits under the 4 ft limit.

Mon to Fri 8 to 6 · Sat and Sun 9 to 2

Ornamental aluminum fencing around Hammond typically costs **$25 to $55 per linear foot installed**. An aluminum pool barrier falls in the same **$25 to $55** range before its gate hardware, and ornamental steel or wrought iron runs **$30 to $100 or more**. A standard walk gate adds $150 to $600 each. Height, picket spacing, slope and gate count decide where a job lands.

[Palisades Hammond Fence](https://palisadeshammondfence.com/) installs aluminum, steel and wrought iron fences in Hammond and across Tangipahoa Parish, western St. Tammany and eastern Livingston Parish. Installation is carried out by licensed and insured fence contractors. These are typical Hammond-area ranges for budgeting, not company prices. This guide covers why aluminum is so often chosen for front yards and pools here, how it compares with steel, and the parts of an aluminum job that move its price. The [fence installation cost guide](https://palisadeshammondfence.com/guide/fence-installation-cost/) compares every type.

Key takeaways

- Ornamental aluminum: about $25 to $55 per foot installed; aluminum pool barrier the same before gate hardware.
- Steel or wrought iron: about $30 to $100 or more per foot, with custom work at the open top.
- Hammond allows metal front-yard fences up to 4 ft, but not chain link; aluminum fits that rule.
- Rackable panels follow gentle slopes; steep ground needs stepped panels and longer posts.
- Pool barriers add self-closing, self-latching gates and a separate pool permit.

## Aluminum, steel and iron compared

|  | Ornamental aluminum | Ornamental steel or wrought iron |
| --- | --- | --- |
| Typical installed range | $25 to $55 per foot | $30 to $100 or more per foot |
| Weight and strength | Light; panels flex if struck hard | Heavy and rigid; better for security and wide gates |
| Rust | Does not rust; the powder coat protects the look | Rusts where the coating is scratched; needs touch-up |
| Custom work | Stock panels and heights | Scrollwork, columns and on-site welding |
| Slope | Many panels rack to follow a grade | Usually stepped or custom-fitted |
| Where it is chosen | Front yards, pool barriers, see-through yard fences | Estate fronts, driveway gates, historic replacements |

The top of the steel range is open because custom fabrication has no ceiling. Standard steel panels start near the bottom of that band; columns, scrollwork and welded gates move it up. The [wrought iron fence](https://palisadeshammondfence.com/wrought-iron-fence-installation/) page covers that work.

## What moves an aluminum job within its range

### Height and picket spacing

A 4 ft fence uses shorter posts and panels than a 5 or 6 ft fence. Closer picket spacing for small dogs, or a “puppy picket” bottom section, adds pickets per panel. Pool barriers set the spacing for you.

### Slope and stepping

Rackable panels follow a gentle grade so the bottom rail stays close to the ground. Where the ground is steeper than the panel can rack, sections are stepped, which takes longer posts and leaves gaps under each step to close. Ditch banks along a street are a common place for that change.

### Gates and posts

Gates are where aluminum fences fail, because a light post can twist under a swinging leaf. Gate posts are often heavier gauge, set deeper, and fitted with self-closing hinges where needed. Each gate is priced on top of the fence, and a gate that drags or droops later becomes a [gate repair](https://palisadeshammondfence.com/gate-repair/) job. Driveway gates in aluminum or steel are scoped separately in the [gate cost guide](https://palisadeshammondfence.com/guide/gate-cost/).

### Mounting and ground

Most posts are set in concrete in the ground, and the post spacing is fixed by the panel width, commonly about 6 ft, so a run cannot simply be stretched to save posts. Posts mounted on an existing slab or pool deck use a base plate and anchors instead. Around Hammond, the USDA soil survey maps mostly poorly drained silt loams with a shallow seasonal water table ([USDA NRCS](https://websoilsurvey.nrcs.usda.gov/)), so post holes can fill with water, and footings are shaped so water runs away from the post.

## Front yards and the height limit

Inside the City of Hammond, a fence in front of the house may be wood, metal other than chain link, wrought iron, simulated wrought iron or masonry, and no taller than 4 ft. Within 30 ft of a street intersection, nothing over 3 ft may stand ([City of Hammond UDC](https://hammond.org/wp-content/uploads/2024/07/20240624_UDC.pdf)). Aluminum meets the material rule and comes in stock 3 and 4 ft heights, which is why it is the common choice for a Hammond front.

Nearby rules differ. Mandeville’s code, as quoted in its 2023 staff reports, lets decorative wrought iron in front setbacks reach 5.5 ft; see the [Mandeville page](https://palisadeshammondfence.com/service-areas/mandeville/). Covington’s historic district asks for new metal front fences under 3 ft, covered on the [Covington page](https://palisadeshammondfence.com/service-areas/covington/). In Hammond’s Historic District, a street-facing fence also needs Historic District Commission review.

## Pool barriers

An [aluminum pool fence](https://palisadeshammondfence.com/pool-fence-installation/) uses the same panels with tighter rules. Louisiana adopts the International Residential Code, whose pool section points to the International Swimming Pool and Spa Code, so barrier height, gaps and gate hardware follow that standard; confirm the details with the local building official before ordering.

Hammond also lists a separate swimming pool permit. The [Louisiana pool fence requirements guide](https://palisadeshammondfence.com/guide/louisiana-pool-fence-requirements/) covers the rules, and the price effect is mostly in the gates: self-closing hinges, a self-latching latch mounted high, and often more gates than a yard fence has.

## Upkeep after the fence is in

Aluminum’s later costs are small, which is part of what the installed price buys. The powder coat needs an occasional wash, and a scratch that reaches bare metal does not rust the way steel does.

Steel and iron are different: a chip in the coating lets rust start, and over the years the fence needs sanding, priming and repainting at the damaged spots. With about 64 inches of rain a year in the Hammond area ([NOAA](https://www.ncei.noaa.gov/)), that upkeep comes around sooner on a steel fence than on an aluminum one. No rebate or grant applies to either.

Compare quotes on the panel style and height, post gauge and spacing, how posts are set, gate hardware, removal of any old fence, the permit and cleanup. A cheaper aluminum quote often means a lighter panel or a lighter gate post, and the gate is where that shows first. If you are still choosing a material, the [vinyl fence cost guide](https://palisadeshammondfence.com/guide/vinyl-fence-cost/) covers the solid alternative.

## What’s inside a Hammond aluminum fence price

| Part of the price | What sets it | Public figure or what to check |
| --- | --- | --- |
| Installer wages | Local pay and hours on site | Louisiana fence erectors: mean $19.92 an hour vs $24.29 nationally, about 18% lower ([BLS](https://www.bls.gov/oes/current/oes474031.htm)); Hammond-metro construction laborers: $19.63 vs $25.02, about 22% lower |
| Panels, posts and gates | Height, style, picket spacing, color | No public local price list; ask for panel style and post gauge on the quote |
| Front-yard design | Hammond UDC 4.1.8 | 4 ft maximum in front; 3 ft within 30 ft of an intersection |
| Fence permit | Hammond UDC Appendix H | $10 residential, $50 commercial; the fee doubles for work begun without a permit |
| Pool permit | Hammond UDC 3.1.2 | Required separately for a pool; fee confirmed with the Building Department |
| Contractor credential | LSLBC | Home improvement registration for residential jobs over $7,500 ([LSLBC](https://lslbc.louisiana.gov/types-of-licenses)) |
| Removal of an old fence | Post setting | $2 to $8 per foot |

A wage is not a billing rate. Materials, insurance, licensing, vehicles and overhead sit in the per-foot price too.

## Illustrative aluminum budgets

Illustrative arithmetic, not quotes.

| Example | How it adds up | Illustrative total |
| --- | --- | --- |
| 120 ft of 4 ft aluminum across a front yard, one walk gate | $3,000 to $6,600 plus $150 to $600 | $3,150 to $7,200 |
| 100 ft of aluminum pool barrier | $2,500 to $5,500 | $2,500 to $5,500 plus self-closing gates |
| 120 ft of standard steel ornamental, one walk gate | $3,600 to $12,000 or more plus $150 to $600 | $3,750 to $12,600 or more |

Add the $10 residential permit inside Hammond city limits, and the pool permit where a pool is involved. The [fence cost estimator](https://palisadeshammondfence.com/tools/fence-cost-estimator/) gives a range for your own length. For a written scope, see [aluminum fence installation](https://palisadeshammondfence.com/aluminum-fence-installation/) or call [(985) 866-3827](tel:+19858663827).

## Questions about this guide

### Is aluminum or steel the better buy for a front-yard fence?

For most homes, aluminum. It costs less installed, typically $25 to $55 per foot against $30 to $100 or more for steel or iron, and it does not rust when the coating is scratched. Steel is stronger and heavier and suits custom work, driveway gates and security needs, but it needs its coating maintained. Both are allowed in Hammond front yards up to 4 ft.

### Can aluminum fence panels follow a sloped yard?

Within limits. Many aluminum panels are rackable, meaning the pickets pivot so the panel follows a gentle grade with the rails parallel to the ground. Steeper ground needs stepped panels with longer posts, which leaves triangular gaps under each step that may need closing for a dog or a pool barrier. Both add labor and parts, so slope moves the price.

### Why does an aluminum pool fence cost more than the same fence around a yard?

The per-foot range is similar, but a pool barrier narrows the choices. Picket gaps, bottom clearance and height have to meet the barrier rules, and every gate needs self-closing hinges and a self-latching latch at the right height. That hardware, the extra gates around a pool deck and a separate pool permit add to the total.

## Related service

### Aluminum fences →

Powder-coated ornamental aluminum for front yards, pools and pets, racked to follow slopes, with stainless fasteners and gate posts sized for the leaf.

## More guides

Cost Guide

How Much Does Fence Installation Cost in Hammond, LA?

Typical installed ranges for every common fence type, the site conditions that move a job within them, and the public figures that sit inside a Hammond fence price.

Learn

What Are Louisiana's Pool Fence Requirements?

Where pool barrier rules come from in Louisiana, the dimensions a barrier is built to, why the gate is the part that fails, and how pool fencing is permitted around Hammond.

Cost Guide

How Much Does a Vinyl Fence Cost Around Hammond, LA?

The installed range for vinyl privacy, the parts of a vinyl system that move it, and the costs a vinyl fence avoids or adds compared with wood.

Cost Guide

How Much Does a Driveway Gate Cost in Hammond, LA?

Why a driveway gate is priced from its parts rather than a single range, what each part adds, and what a complete gate quote includes and leaves out.

Learn

Do You Need a Permit to Build a Fence in Louisiana?

Louisiana leaves fence permits to each city and parish. Here is what Hammond and Covington require, what is known about Mandeville, and how heights, setbacks and corner lots shape the application.