# How Much Does a Privacy Fence Cost in Hammond, LA?

> Privacy fence cost around Hammond, LA: per-foot ranges for 6 ft pine, cedar and vinyl, why solid faces need more post, height rules and illustrative budgets.

URL: https://palisadeshammondfence.com/guide/privacy-fence-cost/

Cost Guide

What a 6 ft solid fence costs in each common material, why a closed face prices differently from an open one, and how height, corners and a shared line change the total.

Last Updated: November 1, 2026

On a privacy fence most of the money is in the posts that hold the face up, not the boards you look at.

Mon to Fri 8 to 6 · Sat and Sun 9 to 2

A 6 ft privacy fence around Hammond typically costs **$15 to $45 per linear foot installed in pressure-treated pine**, **$22 to $55 in cedar** and **$20 to $60 in vinyl**. A standard walk gate adds $150 to $600, and removing an old fence adds $2 to $8 per foot. Board-on-board, 8 ft and horizontal styles are priced from their scope.

[Palisades Hammond Fence](https://palisadeshammondfence.com/) installs wood and vinyl privacy fences in Hammond and across Tangipahoa Parish, western St. Tammany and eastern Livingston Parish. Installation is carried out by licensed and insured fence contractors. These are typical Hammond-area ranges for budgeting, not company prices. This guide covers what is special about pricing a solid fence: the wind it catches, the height limits that cap it, and the costs that sit outside the per-foot number. The broader [fence installation cost guide](https://palisadeshammondfence.com/guide/fence-installation-cost/) compares every fence type side by side.

Key takeaways

- 6 ft privacy, installed: pine $15 to $45 per foot, cedar $22 to $55, vinyl $20 to $60.
- A solid face takes the full force of the wind, so post depth and spacing drive the price more than board choice.
- Hammond allows 8 ft behind the front of the house, measured from the lower side, and 4 ft in front.
- Board-on-board, shadowbox, horizontal and 8 ft fences have no dependable per-foot range and are priced from scope.
- A fence on the property line is presumed common under Louisiana Civil Code article 685, which can change who pays.

## Privacy fence prices by material

Each figure covers material and labor for a 6 ft fence on a normal residential lot. The low end belongs to a straight, dry, open run with one gate; the high end to a line with corners, wet holes, roots, tear-out or several gates.

| Privacy style | Typical installed range | What pushes it up |
| --- | --- | --- |
| [Pressure-treated pine](https://palisadeshammondfence.com/wood-fence-installation/), dog-ear or flat-top | $15 to $45 per foot | Cap and trim boards, steel posts, wet or root-filled post holes |
| Cedar boards on treated or steel posts | $22 to $55 per foot | Clear or select grades, cap and trim, a stained finish |
| [Vinyl privacy](https://palisadeshammondfence.com/vinyl-fence-installation/) panels | $20 to $60 per foot | Heavier profiles, woodgrain texture, aluminum post stiffeners |
| [Board-on-board](https://palisadeshammondfence.com/board-on-board-fence/) or shadowbox | Priced from scope | Roughly half again as many boards per foot and a fully closed face |
| [Horizontal](https://palisadeshammondfence.com/horizontal-fence-installation/) board | Priced from scope | Board grade, tighter post spacing to stop rails sagging, trim |
| 8 ft solid privacy | Priced from scope | Longer, deeper posts and more wind load at every post |

Cedar costs more than pine mainly for the boards. The posts under a cedar fence are usually the same ground-contact treated pine or galvanized steel, because cedar sapwood in wet soil does not outlast a treated post. The [pine vs cedar guide](https://palisadeshammondfence.com/guide/pine-vs-cedar-fence/) explains that trade, and the [vinyl fence cost guide](https://palisadeshammondfence.com/guide/vinyl-fence-cost/) goes deeper on vinyl profiles.

## Why a solid face costs more to hold up

A picket or chain link fence lets wind pass through. A privacy fence stops it, so the full pressure on a 6 ft by 8 ft bay is handed to two posts and levered against the soil at the ground line. Around Hammond that soil is often wet: the USDA soil survey maps mostly poorly drained silt loams, with the seasonal water table within about 9 inches of the surface at the median point sampled ([USDA NRCS](https://websoilsurvey.nrcs.usda.gov/)). Wet silt gives a post less grip just when the wind is hardest.

That is where privacy money goes. Contractors answer the load with deeper holes, wider footings, gravel at the base so water drains, closer post spacing or steel posts, and each of those adds to the per-foot price. A quote that looks cheap for a solid fence often has fewer, shallower posts. The [wind-resistant fence](https://palisadeshammondfence.com/wind-resistant-fence/) page shows how the post plan changes for storms, and the [wet clay soil guide](https://palisadeshammondfence.com/guide/fence-posts-in-wet-clay-soil/) covers setting posts in wet ground.

> Board-on-board and wind
>
> Overlapping boards leave small gaps you can see through at an angle, but the face is still close to solid. Homeowners report choosing board-on-board hoping it will lean less in wind; the post plan, not the board pattern, is what decides that.

## Height rules that set the size of the job

Height is a cost driver, and in this area it is also a legal limit. Inside the City of Hammond, the Unified Development Code allows solid fences up to 8 ft from the front of the house back, and caps front-yard fences at 4 ft. Height is measured from the lower side of the fence, so a run along a raised bed or a ditch bank can lose usable height on the high side ([City of Hammond UDC](https://hammond.org/wp-content/uploads/2024/07/20240624_UDC.pdf)).

Other towns write different numbers. Mandeville’s code, as quoted in 2023 city staff reports, sets 7 ft for side and rear yards; in Covington’s historic district, back-yard board fences stop at 6 ft. The [Mandeville](https://palisadeshammondfence.com/service-areas/mandeville/) and [Covington](https://palisadeshammondfence.com/service-areas/covington/) pages cover each, and the [fence permits guide](https://palisadeshammondfence.com/guide/fence-permits/) explains who issues what. Recorded subdivision restrictions can be stricter than any of these, so check them before choosing a height.

## What’s inside a Hammond privacy fence price

| Part of the price | What sets it | Public figure or what to check |
| --- | --- | --- |
| Labor | Hours on site and local pay | Louisiana fence erectors earn a mean $19.92 an hour, about 18% under the $24.29 national mean; Hammond-metro construction laborers average $19.63 against $25.02 nationally, about 22% lower ([BLS OEWS](https://www.bls.gov/oes/current/oes474031.htm)). BLS publishes no Hammond fence-erector figure |
| Boards, posts, rails and fasteners | Species or vinyl profile, post size, hardware grade | No public local price list; read the material list on the quote |
| City permit | Hammond UDC Appendix H | $10 for a home, $50 for a commercial property; doubled if work begins before the permit |
| Code design limits | Hammond UDC 4.1.8 | 4 ft in front, 8 ft behind the front line, 3 ft within 30 ft of an intersection; wood must be weatherproofed |
| Utility locate | La. R.S. 40:1749.13 | Louisiana 811 notified 48 to 120 hours before digging, weekends and holidays excluded; schedule, not cost |
| Tear-out | How the old fence was set | $2 to $8 per foot, more where old posts sit in concrete |
| Stain or sealer | One face or two, product, wood age | Priced from scope; vinyl skips it |

A wage is not a billing rate: the installed price also carries materials, vehicles, insurance, licensing, disposal and overhead. The BLS figures show that labor here costs less than the national level, not what a contractor charges per hour.

## Illustrative privacy fence budgets

These examples multiply the ranges above. They are illustrative arithmetic, not quotes.

| Example | Fence | Gates and extras | Illustrative total |
| --- | --- | --- | --- |
| 180 ft of 6 ft pine, two walk gates | $2,700 to $8,100 | $300 to $1,200 | $3,000 to $9,300 |
| 180 ft of 6 ft cedar, two walk gates | $3,960 to $9,900 | $300 to $1,200 | $4,260 to $11,100 |
| 180 ft of 6 ft vinyl, two walk gates | $3,600 to $10,800 | $300 to $1,200 | $3,900 to $12,000 |
| Any of the above replacing an old wood fence | As above | Add $360 to $1,440 tear-out | Add to the row |

Every row crosses the $7,500 line at its upper end, which is where the Louisiana State Licensing Board for Contractors requires a home improvement registration for residential work ([LSLBC](https://lslbc.louisiana.gov/types-of-licenses)). Inside Hammond city limits, add the $10 permit.

## Costs that sit outside the per-foot number

### A shared line

A privacy fence is often built on or near the line with a neighbor. Louisiana Civil Code article 685 presumes a boundary fence is common to both owners, and where both lots are already enclosed, either owner can compel the other to contribute to building and repairing it. That can lower your share, but only by agreement or a claim, and it also makes the fence partly theirs. Building a few inches inside your own line keeps it yours. The [Louisiana fence laws guide](https://palisadeshammondfence.com/guide/louisiana-fence-laws/) explains both choices.

### Finish and upkeep

Pine needs a stain or sealer once it dries, and that finish needs renewing every few years in about 64 inches of rain and 86 days at or above 90°F a year ([NOAA](https://www.ncei.noaa.gov/)). That is a later cost wood carries and vinyl does not; [fence staining](https://palisadeshammondfence.com/fence-staining/) is priced from the fence’s height, faces and condition.

### Dogs, pools and gates

A privacy fence built for a dog may need boards run closer to grade or a dig barrier, covered in the [best fence for dogs guide](https://palisadeshammondfence.com/guide/best-fence-for-dogs/). Pool barriers have their own gate hardware rules. Extra walk gates add their own heavier hinge posts and hardware; double drive gates are priced separately in the [gate cost guide](https://palisadeshammondfence.com/guide/gate-cost/).

## Getting a privacy fence priced

Have the rough footage, the height you want, the material, the number of gates and whether an old fence comes out. The [fence cost estimator](https://palisadeshammondfence.com/tools/fence-cost-estimator/) turns those into a range without a phone call. For a written scope that covers the post plan, the permit and the line, see [privacy fence installation](https://palisadeshammondfence.com/privacy-fence-installation/) or call [(985) 866-3827](tel:+19858663827).

## Questions about this guide

### Is an 8 ft privacy fence much more expensive than a 6 ft one?

It costs more than the extra 2 ft of boards suggests. Taller posts must sit deeper to resist the larger wind load, spacing often tightens, and 8 ft boards and panels cost more per piece. The ranges published here are for 6 ft fences, so an 8 ft run is priced from its own post plan. In Hammond, 8 ft is allowed only from the front of the house back.

### Can a neighbor be asked to share the cost of a privacy fence on the line?

Sometimes. Louisiana Civil Code article 685 presumes a fence on the boundary is common to both owners, and where both lots are already enclosed, one owner can compel the other to contribute to making and repairing a common fence. Where they are not, only local ordinances decide. Agree in writing before work starts; this is general information, not legal advice.

### Does a corner lot change what a privacy fence costs in Hammond?

It often adds length and changes the layout. Hammond limits anything within 30 ft of a street intersection to 3 ft high, and front-yard fences to 4 ft, so the street side of a corner lot may step down to a lower section or start farther back. Those transitions add posts, cuts and sometimes a second material, which moves the price up within the range.

## Related service

### Privacy fences →

Solid and semi-private wood and vinyl fences, 6 to 8 ft behind the house, planned for sightlines, storm wind and wet ground.

## More guides

Cost Guide

How Much Does Fence Installation Cost in Hammond, LA?

Typical installed ranges for every common fence type, the site conditions that move a job within them, and the public figures that sit inside a Hammond fence price.

Cost Guide

How Much Does a Vinyl Fence Cost Around Hammond, LA?

The installed range for vinyl privacy, the parts of a vinyl system that move it, and the costs a vinyl fence avoids or adds compared with wood.

Decision Guide

Pine or Cedar: Which Fence Wood Lasts Better Around Hammond?

What actually protects each wood from rot and termites, why the posts under either one decide the fence's life, how the boards age in this sun and humidity, and what each costs.

Decision Guide

Is a Wood or Vinyl Fence Better for a Hammond Yard?

Rot, termites, wind, sun, repairs and price: how pine and vinyl privacy fences compare in this climate, where composite boards fit, and which yards suit each.

Decision Guide

What Is the Best Fence for Dogs in a Hammond Yard?

Match the fence to the way your dog gets out, fit it to Hammond's height rules and wet ground, and treat the gate as the part most likely to let a dog through.